How do I book ?
Contact us and provide details of your event including the date and location, type of party etc. and we will confirm availability and pricing within 24 hours.
Contact us and provide details of your event including the date and location, type of party etc. and we will confirm availability and pricing within 24 hours.
Contact us and provide details of your event including the date and location, type of party etc. and we will confirm availability and pricing within 24 hours.
You can pay prior to the event by bank transfer, PayPal or by arrangement at a consultation at our Edinburgh office. You also have the option to pay on the night. If you decide to pay on the night, you must give the DJ payment prior to commencement of the event.
The majority of people require weekend bookings, and as such we only have a limited amount of bookings we can take before we are booked to capacity. Due to the limited availability we always advise to book as early as possible to avoid disappointment.
Yes, we will play requests. We welcome requests before your party, we can provide you with a playlist request form via email. We also take requests from your guests at the event. We will then merge your requests, your guests requests and our own mix of fantastic music to make sure your event is truly memorable.
We are there to play the best music available. We don't offer a Karaoke service. Edinburgh DJ Hire is a premier music based service and believe in focusing on this service.
Edinburgh DJ Hire has full Public Liability Insurance to the value of £1 million pounds. Additionally, all our equipment is well maintained. Copies of our certificates are available to view on request.
We are based in Edinburgh and cover all areas throughout Scotland.
The DJ will arrive at least an half an hour before your event starts in order to setup with as little inconvenience as possible.
Yes, all our equipment is fully PAT tested and Paul is a certified PAT Testing engineer and completed his course with https://www.pat-testing-expert.com/
Decks 4x Pioneer 800 CDJs
Pioneer 1000mk 2 decks x2
Power Consumption Operational runs off 13amp plugs standard IEC connection
Power Consumption Operational 21 Watts
Acer laptop N1 BC2 Gaming laptop 16 meg ram 2XTB Hd
4x HP laptop computers (Output 18.5 V) with Native Instruments Audio 6 soundcards running Traktor software on windows 7&8 VIA USB 2 power. Power Consumption Operational
Runs off 13amp plugs, standard IEC connection
Traktor F1 controller via USB 2 power x4
Traktor x1 controller
Traktor Audio 6 inferface x 4
Behringer DJX 750 mixer x2 (Power consumption 32 Watts, standard IEC connections 13 amp plug)
Pioneer DJM 500 Mixer x2
Ecler Nuo 4.0 Mixing desk (Power consumption 32 watts, standard IEC connections 13 amp plug)
Traktor F1 controllers x 4 Behringer pl series x2
4X Truesonic TS15A Alto powered PA
active speakers 800 watts per channel
Power Consumption Operational runs off 13amp plugs
Active 800 Watt 2-Way 15" loudspeakers
2x TS12 Alto Truesonic Powered P.A. Active speakers
800 Watts of Class D power
15” low-frequency transducer, 1” neodymium driver
Two mic/line combo inputs with independent volume controls
XLR output to link speakers
Lightweight, trapezoidal cabinet with handles
Use as a traditional upright loudspeaker or as floor wedge monitor
Stand and pole-mountable or flyable
Clip limiter with red LED
Ground lift switch
Contour switch for increased EQ control
Accurate audience coverage, not just on-axis
Designed and tuned in the USA
DAVE 10 G3 Compact 10" active PA System
LD Systems - Active PA-System with DSP
Power Consumption Operational runs off 13amp plugs
LD Sound system specs DAVE 10 G3
Amplifier: Class A/B
Amplifier Output System (RMS): 350W
Amplifier Output System (Peak): 700W
Amplifier Output Subwoofer (RMS): 150W
Amplifier Output Subwoofer (Peak): 300W
Amplifier Output Mid/Hi (RMS): 2 x 100W
Amplifier Output Mid/Hi (Peak): 2 x 200W
Protection circuits: limiter, short circuit, overload
Cooling: Aluminium heat sink
Controls: Power, sub level, Subwoofer Phase Reverse, volume
Display: Power, signal, limit
Operating voltage: transformer, 220 V AC - 240 V AC
Power consumption: 600VA
Galaxian GEM Led
IEC AC IN/OUT on rear to daisy chain power (up to 16 units)
Power Consumption: 20W maximum
Multi-voltage operation: AC 100V~240V 50/60Hz- IEC socket
Dimensions (LxWxH): 11.5" x 13" x 8" / 290 x 325 x 201mm
Weight: 9 lbs. / 3.7 kgs.
DMX laser 40 fscan
Laser power: 40mW
Rated voltage: AC100V-240V/50Hz-60Hz
Power consumption: 80W
Laser wavelength: 532nm
Laser source: solid semiconductor laser generator
Laser colour: emerald green
Scanning: 15kpps scanner system
Scanning angle: ±20 degrees
Laser patterns: 42
Control modes: Sound-activated, Auto, Master/Slave and DMX512
DMX channels: 9 x DMX512
Chassis: Aluminium
Size: 260 x 230 x 185mm (LxWxH)
Net weight: 2Kg
Kam Lasers
x2 Kam I link green lasers
x2 Prosound LED Pod lights
x2 Prosound Led Crystal Ball Lights
x2 Led Fireball Party Lights
Power supply: AC100V-240V / 50Hz~60Hz
Dimensions: 117 x 92 x 46mm
Weight: 0.35Kg
Mystic led predator light
LED Moonflower with 224 sharp red, green & blue high output colored beams (5mm LEDs: 88 Red, 48 Green & 88 blue)
Output similar to a 250W Halogen lamp
Produces a wide coverage of LED patterns that can be projected on a dance floor or wall
Easy-to-use - Operational by its own built-in light show (Sound active) or DMX-512 (USITT)
High output with new lens technology
Very low power consumption
Extreme long lifetime of the LEDs (100,000 hr. rating)
Linkable via 3-pin XLR DMX In/Output, 4 DMX Channels
LED DMX display with 4-button menu
AC IEC outlet on rear to daisy chain power
1/4-inch plug on rear for use with American DJ UC3 universal controller
Includes mounting brackets
Power consumption: 48 Watts / 0.4 Amps
Dimensions (LxWxH): 18.5”x14.75”x14.75” / 470x370x370mm
Weight: 10 lbs. / 4.5 kgs.
Predator Equinox led light
Power supply: 240V
Power Consumption: 20W
Dimensions: 395 x 305 x 305mm
Weight: 4.0Kgs
1 x Chevrolet Smoke Machine